TCP/IP communication
The TD-R50 is specified with TCP/IP communication. Confirm the local network, management-center route and required equipment before installation.
IP INDOOR UNIT / BUILDING ENTRY
TD-R50IP Video Intercom Indoor Monitor
A wall-mounted indoor monitor with a 10.1-inch capacitive HD touch screen, 1024 x 600 resolution and TCP/IP communication. The supplied data sheet lists management-center calling, remote unlocking, security alarm, visitor messaging and elevator-control extension.
10.1-inch indoor monitorNetworkTCP/IP
Display10.1-inch capacitive touch
Sensor inputsUp to 8 connectable sensors
ExtensionSmart home and elevator control
Configuration overview
Make the indoor unit part of the building communication flow.
Use the monitor, network, sensor and management-center requirements as one review scope. Elevator and smart-home functions remain project extensions that need interface confirmation.
10.1-inch touch display
The capacitive HD touch screen uses a 1024 x 600 resolution for indoor calling, monitoring and control functions.
Up to eight sensors
Connect up to 8 sensors according to the data sheet. Confirm sensor types, alarm zones and the required response workflow.
Management-center calling
Video calling, calling the management center, door-to-door intercom and visitor messages support a building-entry workflow.
Remote unlock and surveillance
Remote unlocking and camera surveillance are listed basic functions. Confirm the door station, lock path and permissions for the project.
Elevator-control extension
Elevator control and smart home are listed as extensible functions. Confirm the controller interface and integration responsibility before supply.
Technical record
TD-R50 specifications
Values below are transcribed from the supplied data sheet. Confirm the final revision and destination-market documents before purchase.
| Display | 10.1-inch capacitive HD touch screen |
| Resolution | 1024 x 600 |
| Dimensions | 245 x 158 x 19 mm |
| Material | Engineering ABS and tempered glass |
| Installation | Wall-mounted |
| Communication | TCP/IP |
| Operating voltage | 12V |
| Standby current | 170 mA |
| Working current | 330 mA |
| Operating system | Embedded Linux |
| Sensor connection | Up to 8 connectable sensors |
| Basic functions | Video call, management-center call, door-to-door intercom, remote unlocking, camera surveillance, security alarm, notification release and visitor message |
| Extensions | Smart home and elevator control |
| Platform | Trudian Community Management Center Platform support |
| Working temperature | -10 C to 55 C |
| Working humidity | 10%-90% RH |
| Memory | 64 MB |
| Flash | 8 MB |
Deployment fit
Use the monitor where indoor control and building integration meet.
Confirm the outdoor station, management-center platform, sensor plan and any elevator or smart-home controller before finalizing the system.
Indoor resident communication
Use the touch monitor for door-to-door calls, management-center contact, visitor messages and local control.
Sensor and alarm review
Map up to eight sensor connections, alarm zones and the response process to the building operator.
Elevator and smart home
Define the required controller, interface and commissioning boundary for any extended function.
Download the TD-R50 data sheet
Keep the supplied model document with the network, sensor and building-integration brief during technical review.
Download PDFNeed an indoor-unit review?
Send the entrance station, network route, sensor count, management-center requirement and destination market for a configuration-specific response.
Start a B2B inquiryPut the indoor workflow in the project scope.
Share the model, entrance station, network conditions, sensor plan, elevator or smart-home requirement and required documents to start a focused quotation review for TD-R50.
TD-R50 indoor monitor brief: building events, sensors and power
TD-R50 should be evaluated as an indoor building workflow, not only as a screen. Compare network, sensors, call events, power, extension and handover on the selected revision.
Checks before shortlisting
- TD-R50, 10.1-inch and 1024 × 600 are recorded with the indoor call and control workflow.
- TCP/IP network settings are checked with network and recovery ownership.
- Up to 8 sensors and their alarm zones are mapped to alarm, event and management-centre responses.
- 245 × 158 × 19 mm, 12 V, 170 mA and 330 mA are model or site fields that need confirmation.
- SIP, ONVIF, door release and recording are separated into acceptance events.
- The representative unit and the building's repeat-unit scenario are kept distinct.
- CE, FCC, firmware, controller and handover records travel with the selected revision.
Implementation and handover
- Map indoor units, entrance stations, sensors, network, power and management centre.
- Test call, video, unlock, sensor events, alarm response and recovery.
- Capture model, firmware, sensor and zone mapping, account and permission owner.
- Attach dimensions, power, interface, market and support evidence to the quote.
- Approve replication only after the representative unit's exception list is closed.
Risks to resolve before supply
- A 10.1-inch display does not define the building's call, sensor or release workflow.
- Each connected sensor and alarm zone needs an assigned response owner and acceptance event.
- 12 V, 170 mA and 330 mA values do not replace the site power and recovery test.
- An extension such as elevator or smart-home control can add an unpriced interface.
Before requesting a quote
Choose TD-R50 when indoor events, sensors, network, power, extension and handover records pass the representative-unit test. Share the selected model, configuration and destination market through the project RFQ route.
Frequently asked questions
What network path does the TD-R50 use?
The supplied data sheet specifies TCP/IP for the TD-R50 indoor monitor. Confirm the site network, management-center connection and required topology before quotation.
How many sensors can connect to the TD-R50?
The data sheet lists up to 8 connectable sensors. Confirm sensor type, alarm workflow and project wiring requirements for the final configuration.
Does the TD-R50 support elevator control?
Elevator control is listed as an extensible function. Confirm the required elevator interface, controller and integration scope before supply.