The supplied data sheet identifies TD-M1-B as a smart residential lock. It does not establish a sliding-door application. Confirm the door type and mechanical fit before specification.
Smart residential lock · Model TD-M1-B
TD-M1-B Smart Residential Lock
Residential lock with fingerprint, PIN, IC card, dynamic password, mechanical key and Tuya App access, plus a documented camera and indoor-display configuration.
Request TD-M1-B details291General Users
9Administrators
2 MPNight-vision Camera
4 × AABattery
Product view · TD-M1-B
A residential lock with a documented indoor-display configuration
Use this view to check the handle layout and indoor-display configuration before confirming the door type and mechanical fit.
CredentialFingerprint, PIN, card, key and app route
Capacity291 general users and 9 administrators
Fit reviewDoor type and preparation by project
Documented configuration
The TD-M1-B data sheet lists the following configuration. Confirm final app functions, certification and project documentation by configuration and destination.
| Unlock methods | Fingerprint, PIN code, dynamic password, IC card, key and Tuya App |
| Lock dimensions | Front panel: 375 × 75 mm; rear panel: 375 × 75 mm |
| Material | Engraved aluminum |
| Capacity | 291 general users; 9 administrators |
| Camera and display | 2 MP night-vision camera; 4.5-inch IPS screen |
| Battery and emergency power | 4 × AA batteries; 5 V Type-C USB emergency power |
| Emergency cylinder | Grade C lock cylinder; mechanical key fallback |
| Operating temperature | -25°C to 70°C |
Market documentation
Regional Compliance & Certifications
Match the required certification, language and installation evidence to the exact model, firmware and destination before quotation.
Europe
Documentation routeCE by modelRoHS by modelUKCA route
Certification and market-entry documentation for TD-M1-B are confirmed against the supplied configuration and destination. Check current KfW or other funding rules separately for the project. For other standards named in your tender, ask us which documents are available for this model.
View all certificationsMiddle East / GCC
Project review routeSASO by modelArabic UI by routeTemperature by model
SASO or other destination documents, Arabic-language requirements and temperature evidence are confirmed by model and KSA project. Review the installation conditions before specifying outdoor hardware.
Saudi Arabia detailsUnited States
Documentation routeFCC by variant
FCC and mechanical requirements are matched to the supplied wireless variant and lock configuration. Confirm the intended residential or light-commercial application before release. For other standards named in your tender, ask us which documents are available for this model.
US market detailsTD-M1-B FAQ
The documented emergency solution is mechanical key access together with 5 V Type-C USB emergency power when the batteries are depleted.
Yes, the supplied data sheet documents a Tuya App route. Confirm the final app functions and network requirements for the selected configuration.
Need a model comparison?
Send the door preparation details and intended access workflow for review.
Discuss TD-M1-BTD-M1-B lock brief: indoor-display route, fit and service
TD-M1-B should be compared by the indoor-display configuration, door preparation, power, credentials and fallback. Treat the local dimensions and model record as inputs to a site test.
Checks before shortlisting
- TD-M1-B and its indoor-display route are separated from other lock, monitor and gateway combinations.
- The 375 × 75 mm front and rear panels are checked against the door and display clearance.
- The 4 × AA battery supply and 5 V Type-C emergency input are tied to the actual load and recovery test.
- Tuya account, credential, fallback and resident workflow are named separately.
- CE, UKCA and FCC files are linked to the exact model and revision.
- Pilot, standard order and OEM order are staged as different commercial decisions.
- A 2026 or supplied document date is recorded with firmware, accessory and support owner.
Implementation and handover
- Measure door, trim, display position and emergency path before selecting the kit.
- Test credential, indoor display, lock, fallback, low power and app handover.
- Capture firmware, account, resident permissions, spare and RMA evidence.
- Attach dimensions, label, market file, manual and acceptance result to the quote.
- Release repeat quantity only after the pilot's fit and support exceptions are closed.
Risks to resolve before supply
- A display dimension can fit a drawing while failing the installed trim or clearance.
- A current or battery value without a real load test can misstate service needs.
- An indoor-display pairing cannot be assumed from another lock model.
- A repeat order without the same firmware and accessory record can drift from the pilot.
Before requesting a quote
Approve TD-M1-B when display, door, power, credential, fallback and revision records pass the same pilot gate. Share the selected model, configuration and destination market through the project RFQ route.